Rockford Fosgate amplification at an unbelievable value. The R500-1 mono amplifier pumps out 500 watts into a 2-ohm load, perfect for a pair of R1S410 10" or R1S412 12" woofers. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier.
- ??? 12dB/octave crossover
- ??? 4 Gauge power/ground connections with built-in ATC fusing
- ??? MOSFET power supply
- ??? RCA pass-thru
CEA-2006 Compliant ??? CEA-2006 Guidelines
Number of Channels ??? 1
Rated Power
(RMS Continuous Power) ??? 320 Watts x 1 @ 4-Ohms
500 Watts x 1 @ 2-Ohms
Total Power
(Sum of Rated Power) ??? 500 Watts RMS
Dynamic Power
(PVC/PowerCube? Measurement) ??? n/a
Bridgeable ??? No
Efficiency (average) ??? 67% @ 4-Ohm
58% @ 2-Ohm
Crossover Controls ??? Low Pass (LP): 40Hz-130Hz @ 12dB/octave Butterworth
Tone Controls ??? Punch Bass: 0dB to +12dB @ 45Hz
Signal Input ??? Low Level: 1 RCA pair
Signal Output ??? Low Level: 1 RCA pair
Power Input Connector ??? Screw terminal barrier strip
Power Wire Gauge ??? 4 AWG
Speaker Output Connector ??? Screw terminal barrier strip
Speaker Wire Gauge ??? 8 AWG
Heat Sink Type ??? Extruded Aluminum
Cooling ??? Convection
Remote Controls ??? Punch Level Control
(when connected, is linked to "gain control" to provide remote output level)
Visual Indicators ??? Power
Protect
Circuit Topology Class ??? Class A/B
Frequency Response ??? 20Hz to 250Hz +/-1dB
Shipping Weight ??? 7.4 Lbs.
(3.35 Kg.)
Dimensions (HxWxL) ??? 2.40 x 7.67 x 16.65 (in)